BOLLFILTER Automatic Type 6.18.2 Heavy Duty, Automatic Self-Cleaning Strainer, Backwashing Filter
| Flange Connection | DN 200 - DN 1000 / 8" - 40" |
|---|---|
| Note | The filter type 6.18.2 is suitable for difficult operating conditions, e. g. for the filtration of river water, sea water or ballast water. |
| Filter element | wedge wire candle with smooth surface and hydrodynamic element |
| Grade of filtration | 30 µm - 5mm * |
| Backflushing medium | internal medium |
| Pressure stage | PN 6 / PN 10 (higher pressure stages available on request) |
| Filter housing | carbon steel carbon steel rubber lined stainless steel special alloys |
| Features | cylindrical elements open at both ends with hydrodynamic element – alternately backflushing with second flushing arm |
Filtration of water with very high particle contamination
The BOLLFILTER automatic Type 6.18.2 Heavy Duty is a backwashing self-cleaning filter, which has been designed for filtering water with high particle contamination. Typical fields of application for this BOLLFILTER are non-prefiltered river water and highly fibre-laden process water.
Function of the BOLLFILTER Automatic 6.18.2
The principle behind it: Dual filtration, dual flushing!
The proven principle of dual filtration (where cross and counterflow backflushing is generated) has been supplemented by an efficient dual backflush function. The elements are open at both ends allowing the water to flow through from each end. Due to their length and increased diameter, their filter surface area is especially large.
Advantages of the BOLLFILTER Automatic Type 6.18.2
- High performance in high particle contaminated applications
- Defined filtration degree
- Low operating cost due to low maintenance and long service life
