BOLLFILTER Simplex Type BFB-C HD

Features
The simplex filter for separating solids and aerosols (humidity) from gases. Gases saturated with dirt and humidity are separated by the multi-layered coalescer element (see figure).
Flange Connection
ASME or DIN
¾” - 8" / DN 20 - DN 200
Filter element
fiberglass/stainless steel disposable cartridges*

Option available for preliminary separation using demister, cyclone, or cyclone demister all within the same housing.
Grade of filtration
0,1 - 250 µm
Pressure stage
>500 bar (size and temperature dependent)
Filter housing
- carbon steel (St 45-8 / A106B)
- stainless steel (1.4404 / 316L)
- non-welded
General Accessories and Special Equipment
1.) Connecting elements
Flexible connection possibilities
e.g., flanged, NPT, weld-on ends, ball valves, needle valves

2.) Instruments
Differential pressure connections such as optical and optical/electrical differential pressure measurement systems

3.) Materials
Filters available on request in Duplex or Super Duplex

4.) Optional equipment
Cover lifting/pivoting mechanism
Cover safety device
Special accessories for gas filtering
Pre-separator for liquid reduction / cyclone and cyclone demister

In addition to standard, filters also available in Duplex and Superduplex (on request)

Liquid level switches

Magnetic level indicator

Bulls Eyes

Adaptable fluid reservoir for saving the separated fluid
BOLLFILTER Simplex Type BFB-C HD

Simplex coalescer gas filter for generators and turbines

The BOLLFILTER Simplex BFB-C HD is used as a gas filter and coalescence separator in chemical and petrochemical plants, in the offshore industry, and in the power plant sector. This filter is primarily used for filtering fuel gas and seal gas. In cases of heavy contamination, the filter is combined with a pre-separator, e.g. a cyclone or cyclone demister, to separate off solids and liquids. A rapidly rotating flow of gas is required in order to separate out small and lightweight particles. Therefore, the cyclone is designed under actual operating conditions in order to achieve the most efficient separation possible.

Advantages of the BOLLFILTER Simplex Type BFB-C HD

BOLLFILTER’s Simplex BFB-C HD is a simplex filter with a coalescer and particle filter for separating solids and aerosols (liquid content) from gases.

The simplex filter guarantees maximum purity for gases with a filter fineness of up to 0.1 micrometres and was developed specifically for an extremely high operating pressure of up to 500 bar. As with all of our high-pressure gas filters, the housing is constructed of steel and stainless steel without any welded joints.

Cleaning the simplex coalescer gas filter

The filter is shut down in the event of a loss of pressure, heavy soiling of the filter, or to replace the disposable filter element. As such, it is ideally suited for use in supervised systems that can be switched off using shut-off devices and for systems with low to medium gas flow rates.

Video

    Would like to contact us?

    All other countries
    France
    Nordic countries
    Spain, Portugal, Brazil
    UK, Ireland
    USA, Canada, Mexico
    Bollfilter Logo

    Please select a region from the list above to show the right contact person

    Jörn Grotepaß, Head of Business Unit Compressors & Turbines Boll & Kirch Filterbau GmbH
    Jörn Grotepaß
    Jens Debel-Hasløv, Sales Manager BOLLFILTER Nordic
    Jens Debel-Hasløv