Ship at sea iStock

Lube oil filtration for engines

The system transports lube oil from the main tank to the engine. The system consists primarily of the supply pumps (redundant), pump protection filters, an automatic filter with a defined filtration rate, and a lube oil treatment system (optional).

The lube oil is transported via the supply pumps, screened by the pump protection filters, through the automatic filter (fine filtration). Flushing oil treatment can be applied optionally in the backflushing line.

The majority (approx. 95 %) of the filtered lube oil is supplied directly to the engine. The rest of the oil is filtered even further by an additional automatic filter and is used for the hydraulic power supply in two-stroke engines (common rail).

Your benefits:

  • Space-saving design
  • Easy to install and retrofit
  • Precise degree of filtration
  • Reduced risk of engine failure
  • Reduced maintenance costs
  • Extended service life of engine components
  • Increased efficiency of the entire system

BOLLFILTER as protection for two-stroke engines

The automatic backflushing filter type 6.64.1 cleans itself based on an adjustable period of time or by reaching a differential pressure due to the collection of contamination. In addition, this type of filter can be outfitted with a change over valve and attached by-pass filter (optional), which also ensures the supply of filtered lube oil while performing maintenance.

BOLLFILTER as protection for hydraulic applications in two-stroke engines

The automatic backflushing filter type 6.64.1, equipped with fine filter elements, is located in the open hydraulic system and helps to keep the concentration of particles in the lube oil at a low level for the entire engine.

This filter also cleans itself based on an adjustable period of time or by reaching a differential pressure due to the collection of contamination. In addition, this type of filter can be outfitted with a change over valve and attached by-pass filter (optional), which also ensures the supply of filtered lube oil while performing maintenance.

BOLLFILTER as protection for four-stroke engines

The automatic backflushing filter type 6.48 is a continuous backflushing filter.
This type of filter can be mounted on the engine and operates in horizontal and vertical configuration. The 6.48 filter features an internal fail-safe function with a second filtration stage in order to ensure at all times the supply of filtered lube oil to the engine.

The duplex filter can also be installed optionally as an indicator directly in front of the engine if the automatic 6.48 filter is not mounted directly on the engine.

Downloads
Wide range of purposes ▶ filtering diesel engine lubricants ✓ filtering fuels ✓ filtering coolants in machining plants and transfer lines ✓ Find out more!
BOLLFILTER Automatic Type 6.64
For the filtration of ▶ water ✓ lubricating oil ✓ fuel ✓ machining coolants ✓ component wash solutions ✓ chemicals ✓ duplex filter ▶ Find out more!
BOLLFILTER Duplex Type BFD
BOLLFILTER Simplex type 1.12.2 ▶ Minimal pressure losses ✓ Most compact construction ✓ Minimal number of components ✓ ▶ Mehr erfahren!
BOLLFILTER Simplex Type 1.12.2
Would you like to contact us?
Martin van Son
Martin van Son Head of Filtration for Engines

Here you will find the information on the privacy policy