Simplex filter BOLL & KIRCH

Simplex Filter

Advantages of the Simplex Filter

Simplex filters are the basic model of filtration technology. They have a compact design and are extremely easy to clean. The simplex strainers are preferably used where systems or the filter can be switched off with additional shut-off devices. They serve to protect the system parts from soiling and siltation.

The simplex filters meet technical filter and reliability requirements to the same level as switch-over duplex filters or automatic filters from BOLL & KIRCH. Depending on the application various options for housing materials and filter element designs are available and can be used. The simplex filters from BOLL & KIRCH provide a compact design and minimum number of parts, as well as the simple cleaning. Both liquids and gases can be filtered.

Cleaning of Simplex Filters

Cleaning of the simplex filters is very simple. To do so, the filter chamber is depressurized, the housing cover is removed, the extracted filter element can than flushed in cleaning fluid and blown out with compressed air.

BOLL & KIRCH Simplex Filters

Depending on the flow rate and the medium, the following simplex filters can be used:

Simplex Filter

BOLLFILTER Simplex Type 1.03.2 »

BOLLFILTER Simplex Type 1.03.2
Flange Connection
DIN Only DN 65 - DN 300 / (Approx. 2 ½" - 12")
Connections inline
yes
Filter element
basket element ring element candle element multimantle element

BOLLFILTER Simplex Type 1.12.2 »

BOLLFILTER Simplex Type 1.12.2
Flange Connection
ASME or DIN 1" - 3" or DN 25 - DN 80
Connections inline
yes
Filter element
star-pleated element, basket element, filter cartridge

BOLLFILTER Simplex Type 1.65.1 / 1.53.1 »

BOLLFILTER Simplex Type 1.65.1 / 1.53.1
Flange Connection
ASME or DIN 2 ½" - 14" or DN 65 - DN 350
Connections inline
only possible for Type 1.65.2 / 1.53.2
Filter element
basket element ring element filter candle insert multi-mantle element

BOLLFILTER Simplex Type 1.78.1 / 1.58.1 »

BOLLFILTER Simplex Type 1.78.1 / 1.58.1
Flange Connection
ASME or DIN 2 ½" - 14" or DN 65 - DN 350
Connections inline
Inline in option
Filter element
star-pleated element disposable cartridges

BOLLFILTER Simplex Type BFB-P »

BOLLFILTER Simplex Type BFB-P
Flange Connection
ASME or DIN 1"-6" / DN 25 - DN 150
Connections inline
No
Filter element
- cleanable star-pleated filter element made of stainless steel

BOLLFILTER Simplex Type BFB-P HD »

BOLLFILTER Simplex Type BFB-P HD
Features
The simplex filter for effective particle filtering. Due to the high variety of versions and an above standard number of optional accessories, this product can be adapted to almost all applications in the area of gas filtering.
Flange Connection
ASME or DIN ¾” - 8" / DN 20 - DN 200
Connections inline
No

BOLLFILTER Simplex Type BFB-C HD »

BOLLFILTER Simplex Type BFB-C HD
Features
The simplex filter for separating solids and aerosols (humidity) from gases. Gases saturated with dirt and humidity are separated by the multi-layered coalescer element (see figure).
Flange Connection
ASME or DIN ¾” - 8" / DN 20 - DN 200
Filter element
fiberglass/stainless steel disposable cartridges* Option available for preliminary separation using demister, cyclone, or cyclone demister all within the same housing.

BOLLFILTER Simplex Type 1.88.2 »

BOLLFILTER Simplex Type 1.88.2
Flange Connection
ASME or DIN 4" - 36" or DN100 - DN 900
Connections inline
standard
Filter element
basket element
Contact